Special Design Card Reader Mechanical swing gate barrier/entrance control
1. The electric control adopts DC motor to drive stable and reliable, and has low failure rate. Ultra high light traffic indicator function: directional instructions are designed with ultra bright LED lights, indicating more prominently;
2. In the case of the person who has not swiped the card into the passageway, the equipment alarm will prompt the traveler to swipe the card.
3. The function of the reverse alarm system: when a pedestrian swipes the card, the device alarms the alarm.
4. Check the following function: when the first person swipes the card, the second person doesn't swipe the card and the device will alarm.
5. The bicycle delay function: prevent the gate from hitting the bicycle;
6. Various control functions: by set the setting, the brake machine can be set at special time to the regular open mode, which satisfies a large number of people.
7. The mode of choice: to meet the different requirements, it can be set up as a two-way credit card or a one-way credit card and free pass.
8. Various control functions: external button, remote control, bar code, IC or ID, etc. 9.Remote control function: the RS485 can be connected to RS485 by computer and the RS485 remote control brake machine.
10. Automatic reset function: after the credit card has not passed in the specified time, the lock will return the lock to cancel the pass, time 1-60 seconds.
Features and Benefits
- Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
- If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
- Flap barrier is with 485 interface for long-distrance control concern.
- Anti-rush function: if there is no open single, arm will be holding tightly.
- Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
- Flap barrier is with standard electrical interface for the integration of various readers and writers.
- Flap barrier can count how many passenger has passed and will show it in the LED display.
- Direction display to guide passenger which direction is to go.
|Max power consumption||w||35|
|Working temperature||degree||-25 to +70|
|Dimension excluding bars||mm||1400X250X980|
|Net weight including bars||Kg||69|