High safety swing gate entrance access control turnstile barrier gate for office security

Turnstile Gate Product Description:

1, Mechanical drive unit with solenoid locking mechanism eliminate the use of expensive electric motor and reduce maintenance cost.

2, If arm rotated more than half, it will auto-rotate to the next idle position. If arm rotated less than half, it will auto-rotate back to the current idle position.

3, Built in adjustable tensioner to control rotation force to minimize over rotation. Arm just need to be pushed lightly to rotate therefore even elderly or children are able to use the turnstile.

4, Turnstile can be configured to be bi-directional or uni-directional. Housing is locked with special key to avoid tampering.

5, When power off, the arm will be dropped down (optional set free passage when power off) to the request of fire protection.
When power on, the arm can lift by hand.

6, Emergency configuration: the tripod will drop automatically by power off to provide a clear walkway for escape in the event of an emergency

7, Control panel with count and LED digital function. Traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing.

8, It can be used for intelligent control and management of the passage after equipped with different access control system.

Our advantages:

1.90% of production processes are developed by ourselves so we can control the costs and provide the competitive price correspondingly.

2.We use Baoxin Stainless steel, the best brand in China.

3.Our power supply is the best brand from Taiwan “Mingwei” or “Fujia”.

4.We take 3M glue imported from American instead of the glass glue which other counterparts use.

5.Germany “Optibelt” and American “Gates” is the belt we are using now.

6.Our LED indicator imported from American Bridgelux and Taiwan Epistar led chip.

7.We deal with the cover by original drawing which is better than manual drawing.

8.It usually take us at least 8 procedures to weld and polish the edge so that it looks glossy and feels much smooth.

9.We fasten the wire by Cabling Channel. It can protect the wire so well and make it look tidy.